Devices

custom-made

New devices

Here are the 2 new devices we have developed with the latest technologies and expansions. We are constantly updating our devices and making them as comprehensive as possible to work optimally in various situations.

This way, as a manufacturer, we can meet the customer's requirements, especially custom-made!

These TR1 and TR2 are now also standard equipped with the remotely switchable system, which is necessary for some applications.

The installation will set itself after the set time, which can vary from 1 sec. to infinity, so the customer can never forget to put the device back into service. Think of jacuzzis and swimming pools in hotels and private homes or in companies where the production channels are not always under liquid... plenty of applications, now it's possible!

Also in the TR2, there is a large display that shows and registers, among other things, power failures, supply voltage, etc., so we can always go back into the logbook when there is a problem.

Transducers

Various transducers for different purposes

Transducers are an important link in all installations. They ensure that the ultrasonic waves reach the treated areas with the right frequencies and frequency range. These must be developed and manufactured very carefully, tailored to the customer.

Since we are a manufacturer, we can carefully adapt our transducers according to the project that needs to be carried out. This can be in all possible shapes, strengths, and variety in frequencies.

Each application has its own operating frequency that we can set to build an effective installation. And if we don't have it in our range, we'll just develop it! That's our strength.

open water storage

Ultrasonic floater for open water

This Transducer is one we use for open water storage, or even in existing swimming pools.
The floater itself (here a plastic tube) can vary in size, shape, and color, depending on where it needs to be placed. The transducer itself can, of course, if possible, be mounted with a bracket that is then attached to the side with bolts. It is very important that the position of the transducer remains fixed and points in the right direction. With a floater, you have the advantage that it moves with the water level (of course, be careful when there are sloped sides). Naturally, this form can also vary depending on the application (this is just an example).

ultrasonic injection

A Y-shaped transducer

A Y-shaped transducer will be used when the transducer needs to be in contact with the water. A good example for this transducer is when ultrasound needs to be injected into a pipe. Then this Y Transducer can be mounted between the pipe to have 100% contact with the water. This way, we are sure that we have no loss of ultrasonic waves and ultrasonic power in the water installation. Especially when a long distance needs to be bridged. The transducer can be in plastic form or in stainless steel.

open water storage

Multiple Ultrasonic floater

For open water collection, we build a raft where about 6 transducers are placed underwater.
The big advantage is that we can direct the transducers in the direction we want.
This example can also differ from what we build, it can also be equipped with fenders to increase the carrying capacity.
Everything can then be custom-made in any shape.

cooler system

Boxcoolers

Our installation for boxcoolers expands with this 2 or 4 channel control box with display.
For boats or industry, we can use this control box for boxcoolers, heat exchangers (both plate and tube coolers), etc.
This has an aggressive form of ultrasonic injection in pipes of large diameters, mainly intended for industry.
A completely different ultrasonic pattern and sequential distribution of the ultrasonic pattern, suitable for heavy-duty work.

Control boxes

NDV Ultrasonic control boxes

Our NDV Ultrasonic Control Boxes, in which our own developed circuit boards are installed, are cast with resin. Moisture or other disturbing elements are eliminated with this to ensure operational reliability.

The frequencies we release into the water have a wide range of frequencies themselves. The frequency and the sequential height of the frequency are randomly determined by our own developed generator, which determines what it transmits at what moment.

This prevents habituation of the biofilm, so it cannot become resistant to the frequencies, which is of course very important for the operation of the installation and its result. We have control boxes with one or more channels to which we can connect the transducers, with or without display.

The display ensures that you have visual communication to read power outages when they occur, and how often they have occurred. Through the display, you can check whether you have actually received the electricity you paid for (important for boats).